Safety Glass Holder for Sioux Bench Grinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Safety glass housings for Sioux Bench Grinder. Mounts on 1/4" diameter rods. Glass opening is 5-3/8" x 3-1/2".
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Both of the holders for the safety glass on my dad's bench grinder broke. These holders are very similar in shape to the original design (a few liberties were taking with non-critical dimensions).
The shield holders mount on 1/4" diameter rods. The safety glass is 1/8" thick and is 5.375" x 3.5".
The OpenSCAD file has options for mounting on the right hand side or left hand side of the grinder. It also has an optional hole that could be used for running power to a replacement LED strip. You'd need a 110v to 5v AC to DC converter to power a strip but it should be easy to mount for the system. Included is a photo of the dimensions measured off of the original grinder shield.