1 / 8
Wio Tracker L1 Pro Holder with Belt Clip — zdjęcie 1
1 / 8

Wio Tracker L1 Pro Holder with Belt Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is belt holder for Wio Tracker L1 Pro. It has mount holes compatible with walkie-talkie belt clip for Baofeng UV-5R

Ocena
5 / 5
Polubienia
39
Pobrania
240
Wydruki
5
Wyświetlenia
1639
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is belt holder for Wio Tracker L1 Pro. It has mount holes compatible with walkie-talkie belt clip for Baofeng UV-5R (costs about 1 USD). Clip allows holder to be attached to waist belt, backpack, pocket or something else. It has additional mount holes so other kinds of attachment can be made too.

Clip is mounted with M2.5x7 screws

As 2.5mm it is not common screw, there is also model variant for M3x8mm screws. You have to widen holes on clip by yourself.

To assemble, insert M2.5 or M3 hexagonal nut from inside into slot. Slot is tight so use soldering iron set to around 200 °C to insert nut. Then you can attach clip from outside.

Wio Tracker L1 slides easily into holder, and there is tiny latch to prevent it fall out. To remove device from holder lightly press top of device to front using thumb and us other fingers to push from the bottom to pop it out.

There is eye at right site that can be used to additionally secure device by lanyard if needed.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.3

Infill:

15%

Filament Material:

PETG


Notes:

Print using PETG oriented model bottom at the plate. There is no need for support. Use ironing on all top surfaces for stylish finish. I do not recommend using PLA as it is stiff and brittle and may break on holder use. Some flexibility is needed.

License note: it is not not allowed modifying this model to add brandings or other promotions of commercial and non commercial subjects (companies, associations, clubs, institutions etc.). You may brand it only with your personal info. Sale of printed models is unacceptable in any form, even charging for material.

Category: Electronics

Tagi