1 / 4
Drink Can, Pet Food Can & Soft Drink Bottle Openers — zdjęcie 1
1 / 4

Drink Can, Pet Food Can & Soft Drink Bottle Openers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three types of openers, for cans and bottles for those that have trouble opening these products.

Ocena
5 / 5
Polubienia
8
Pobrania
68
Wydruki
1
Wyświetlenia
290
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I made these with the thought of helping the older people at my church that may have problems with cans and bottles.

The smallest one is for drink cans that gives leverage to lift the pop top. The thinnest part is opposite side of the magnet. There is a hole for hanging up and two versions for a magnet, 4mm or 6mm x 2mm.

The larger one is for pet food or soup cans, or any can with a wider tab. Same hole for hanging up and a 6mm x 2mm magnet.

The bottle opener was designed with number of grooves to fit a Diet Coke, but it will press on other 2 liter, 1 liter, or 24oz bottles. It gives a hand grip to just open the bottle then remove the grip and take the cap off otherwise the cap is stuck is the grip and need to be put back on the bottle to remove the grip. There are two versions for a magnet, 8mm or 6mm x 2mm.

Depending on the printer and the filament the magnets may give a little problem installing. With mine the gray ones went in easy, the white a little more resistance with the black filament ones the worst. The tab lifter magnets should press in, but I suggest a little adhesive. The bottle cap grips print with the magnet hole down and squish is a problem. It will need to be trimmed before the magnet is inserted. Also, it needs to be supported from the other side to put the magnet in or it will break and push through the plastic.

I used generic PLA at 0.20 layer, 3 to 4 walls, 25% infill. Drink can print flat, and the filament seems to span across fine. Larger one print on side.

Tagi