Chamberlain Garage Remote - Stick On Holder (Two Versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use double-side foam tape to fasten this holder in your chosen location.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
This print is for the Chamberlain model 953ESTD. This remote control unit comes with a metal clip to use for mounting to a car sun visor, but this is not always a convenient location.
These two versions of holders for the remote control are intended to be attached with double-side foam tape :
Version 1 : A simple clip type holder.
Version 2 : A "slide in" holder with an integral "safety cover" intended to help prevent accidentally pushing the wrong button on the remote.
Also included is a SafetyClipTest piece which can be printed quickly to check the fit on your remote.
Related prints :
https://www.printables.com/model/77527-safety-cover-for-chamberlain-remote-control-garage
https://www.printables.com/model/633299-safety-cover-for-chamberlain-remote-control-garage
Assembly and Use
Remove the metal clip from the remote. Apply double-sided foam tape to the back of the holder (see photo).
When attaching the holder, I recommend inserting the remote in the holder first. After attaching the holder, remove the remote so that the foam tape can be firmly pressed on.
Print Instructions
Print in PETG using the 3mf files provided, otherwise :
0.2mm layer height
3 perimeters
no infill
brim
If you plan to use this in a car, I recommend using PETG or some other filament which can withstand the high temperatures found inside a car on a hot day.
CAD
The OnShape 3D CAD files for this are here :