1 / 3
Alternative shaft for crunchlab rocket revolver kit — zdjęcie 1
1 / 3

Alternative shaft for crunchlab rocket revolver kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement part for the crunchlab rocket revolver rocket.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The original (yellow in the picture) was too tall. There was a too wide gap between the acrylic disc and the plywood so the air escaped.

First I tried to re-create a better part, but it required support when printing and did not turn out well. Then I realised it would be better to print a bunch of spacers and I can find the one that works right for me (other spacers might work better for others). So I used OpenSCAD to create a print. The scad file is included if people need or want to play with the parameters.

Hopefully this helps someone

I have no affiliation whatsoever with crunchlab or Mark Rober.

Tagi