1 / 3
Silicone Wire Spool (48mm dia x 34mm wide) Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Five slot holder for 48mm x 34mm silicone wire spools. Brand of wire was BNTECHGO
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 5-slot spool holder for Silicone-insulated wire spools 48mm in diameter and 34mm wide.
The spools snap in place with a slot for the wire to exit near the top front.
Printed in PLA. I printed at a 45 degree angle (with brim & supports). That was cleaner than printing standing on one end.
The rotating gif was created with stl2gif from https://github.com/adamdevmedia/stl2gif/