Caliper case Mitutoyo 150mm 530-104
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an upgrade from my old caliper case design. It works and it prints in one piece if you own an MK3
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 191
- Wydruki
- 1
- Wyświetlenia
- 1537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an upgrade from my old caliper case design. It works and it prints in one piece if you own an MK3
All you need is :
2 neodymium magnets 3x8mm
2 screws for the hinges (I used 2 headless allen screws)
I've done some modifications on the design so I can upload it, but I haven't tested it. My version has 3 magnets instead of 2 and I have them glued in. In the new design you will need two and the hole should be tight enough.
I've also provided the STEP file in case anyone wants to modify it. If you're designing on solidworks please hmu so I can send you the assembly and the parts.