1 / 2
Case for Raspberry Pi 5 with Zooz ZAC93 and Cooler (snap fit)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case to fit the Pi with the Zooz ZAC93 GPIO Z-Wave Module on an 8mm GPIO riser and Pi 5 Cooler.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Remix: You will need the bottom from the original case.
It's essentially identical to the original case, but with an extra 8mm of clearance in the top shell. The original case would've fit with the ZAC93 or the Pi cooler, but to fit both the ZAC93 needs to go on an 8mm riser, so I expanded the top of the case. Ignore the garbage pictures and print quality of my example.
For a write up on the whole reasoning for this and how to use the ZAC93 without sacrificing Bluetooth see the post on my site.