TPU Sealing Insert for PTFE Slot Elegoo Centauri Carbon Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sealing insert that goes into the "Elegoo Centauri JesusFreak remix: Slotted Blank CC Riser for PTFE Tube" PTFE Slot
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
What:
A sealing insert that goes into the "Elegoo Centauri JesusFreak remix: Slotted Blank CC Riser for PTFE Tube" PTFE Slot
This will help seal the open space around the PTFE tube. It's a bit of a WIP. Could be adapted to other designs if you're handy in CAD. I have a few variations - one with the thin surface recessed and a "retraction friendly" one with the surface at the end of the insert. Also added some versions with thicker/wider flanges to help keep it in place.
Printing:
Printed in TPU 95A, at the orientation it comes in as. In the .3mf file I added a priming cube of TPU to print first to ensure my dried TPU is coming out of PTFE tubes by the time I get to my real object I want to print. If you don't like it you can disable it. I used a 0.6 nozzle, 0.18 layer height, 2 walls, 15% infill.
Post Processing:
You may need to use a razor blade to re-slice/tear the slot for the ptfe tube. But it should be thin enough that it doesn't take a lot of force. The thin membrane is 0.65mm thick but I've added the .stp file so you can modify it as needed.