Maslow 4 CNC Router Spindle Speed Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Spindle Lock solution to use on a Maslow 4 CNC router.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fit the Maslow 4.0 and 4.1 large format CNC ( https://www.maslowcnc.com/about-maslow4 ), this toggle simplifies locking the spindle for single tool collect wrenching. The goal of this tool is to make changing router bits easier. The speed lock uses the router's spring tension against an over-center mechanism to lock itself in place while in use. This updated version contains a revised geometry to use only M3x12mm bolts, ergonomic, and usability enhancements. Enjoy!
The parts are oriented in this version for the best print option. Supports are required. I used a file to clean up the model before assembly. The grey body can be printed at 50% infill, but I would recommend 100% for the other parts.
Use an M3x12mm bolts (extras from the Maslow kit) throughout. I did not use nuts on any of the bolts. The hinge bolts on the back of the main body gently thread into a choked-in segment of the toggle to hod them in place. Do not over tighten any hardware. The length of the articulated beam (push rod?) can be fine tuned to compensate for wear or other variations.
Print Settings
Printer brand:
FlashForge
Printer:
Creator 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
Fine
Infill:
50% to 100%
Notes:
The parts are oriented in this version for the best print option. Supports are required. I used a file to clean up the model before assembly. The grey body can be printed at 50% infill, but I would recommend 100% for the other parts.