Ghostbusters Wall Plaque – Logo & Team Silhouettes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist Ghostbusters wall plaque with logo above the four team silhouettes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Hey visitor, found your favorite film or TV show? Check out the full movie collection here:
https://www.printables.com/@WalterSpanu_3005190/collections/2922712
Ghostbusters‑inspired wall plaque featuring the iconic logo in relief above the four Ghostbusters silhouettes, designed as a low‑relief plate that prints easily without supports.
Printing recommendations:
Layer height: about 0.2 mm.
Infill: 15–20% is sufficient because most of the geometry is thin.
Supports: not required if printed flat with the front side facing up.
No glue required for "full version" (check the STL).
For a two‑colour effect, print the background and silhouettes separately in different colours or use a filament change at the appropriate layer.
Default frame dimensions:
Inner size: 140 × 190 mm
Outer size: 150 × 200 mm
Back holes: diameter 7 mm, depth 2.69 mm (for hanging or connecting frames).
For a better “experience”, check the Modular Wall Art Frame 200×150 project on my profile and combine this plate with other movie‑themed silhouettes to create a full Star Wars or cinema wall.