Box with magnetic lid / Krabička s magnetickým víčkem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box with magnetic lid (more variants)
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
[EN]
Simple box with a magnetic lid, more variants.
Components:
4x magnet 5x3 mm (box)
4x magnet 5x1.5 mm (lid)
Print instructions:
print a box and a lid separately
pause the print before the layer where the magnets are supposed to be inserted (estimate the layer; due to the number of variants, it is not possible to list them all)
insert magnets using superglue and wait some time to dry up (approx. 2 minutes)
continue printing
Dimensions (some combinations of):
box - length: 40/60/80/100 mm
box - width: 40/60/80/100 mm
box - height: 30/40/60/80/100 mm
lid - height: 5 mm
Material: PLA
Layer height: 0.2 mm
Infill: Honeycomb (15 %)
Perimeters: 2
[CZ]
Jednoduchá krabička s magnetickým víčkem, více variant.
Komponenty:
4x magnet 5x3 mm (krabička)
4x magnet 5x1.5 mm (víčko)
Instrukce k tisku:
tiskněte krabičku a víčko zvlášť
pozastavte tisk před vrstvou, kde se mají vkládat magnety (vrstvu odhadněte, vzhledem k počtu variant není možné všechny vypsat)
vložte magnety s použitím vteřinového lepidla a nechte zaschnout (cca 2 minuty)
pokračujte v tisku
Rozměry (některé kombinace):
krabička - délka: 40/60/80/100 mm
krabička - šířka: 40/60/80/100 mm
krabička - výška: 30/40/60/80/100 mm
víčko - výška: 5 mm
Materiál: PLA
Výška vrstvy: 0.2 mm
Výplň: plástev (15 %)
Perimetry: 2
![]() |
