1 / 2
Rainbird popup sprinkler body removal tool — zdjęcie 1
1 / 2

Rainbird popup sprinkler body removal tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Insert in sprinkler body for safe removal.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

When you need to remove or raise your rainbird sprinkler, remove the top cap and use this tool with either a 52mm socket, or a 1/2" drive and a socket wrench to spin out the body, service it or add a riser then put it back in. It saves a lot of digging or damage to the body if you use pliers.

Version 2.6 centers and scales the STL for easier printing.

Use as much infill as possible so that the torque of the wrench doesn't crack the tool. I would also add extra top layers as solid for more strength. Clay soil can really grip.

A little water (not much) around the sprinkler body will help it slip. When you complete the work be sure to flush the system with a short run (2 seconds) or the zone then screw the popup cap back on.

Tagi