Bottle Desk Christmas Tree with Fairy Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desktop Christmas tree made from an upcycled Appletiser bottle with printed star and base plus LED fairy lights
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
Last year at Christmas I drank a bottle of Appletiser and thought the green cone bottle looked a bit like a Christmas tree. So for this Christmas I thought I'd upcycle it into just that.
Items needed
Appletiser bottle - available in the soft drinks aisle
Bottle stopper fairy lights - available online, search "usb bottle fairy lights"
Gold filament of your choice - I used a Sunlu satin gold PLA
Printed parts
Print parts in the same orientation as the files. No supports are needed.
Print the star at a fine layer height for maximum lustre. I chose 0.15mm and the "balanced" profile. Use 3 perimeters for screw strength. Try concentric infill on the top and bottom surfaces for a beautiful star pattern.
Print the base as you like, I did 0.2mm "fast".
Print lots of the star filling (or skip this and use marbles or colored aquarium gravel). To save plastic use just 2 perimeters and a low infill. I did around 2 beds full of them or about 100.
Instructions
Wash up the Appletiser bottle and peel the label off. Any label residue can be cleaned off with nail polish remover or isopropyl alcohol.
Put the bottle into the base.
Fill the bottle up to the top of the base with the mini printed stars (or colored aquarium gravel, marbles, whatever you like). This is to prevent most of the fairy lights from getting hidden in the base.
Insert the LED fairy lights.
Loosely screw on the star topper. The print may crack if you over-tighten.
Usage
To be used merrily on a desk or as a centrepiece. Happy Holidays!