220V Power Outlet Safety Cover – Screw-Mounted Foolproof Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed screw-mounted cover to prevent accidental use of 220V outlets in 110V homes.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a screw-mounted safety cover designed to prevent accidental use of a 220V power outlet in 110V homes.
In my house, almost all outlets are 110V, but there is a single 220V socket. Over time, different devices were accidentally plugged into it, resulting in damaged equipment.
This cover was designed as a mechanical, foolproof solution: it completely blocks direct access to the outlet and cannot be removed without tools.
The cover is fixed to the wall using screws and threaded inserts, making it ideal for homes, workshops, labs or shared environments where electrical safety matters.
⚠ Important: This is a physical safety cover only. It does not modify or isolate the electrical circuit.
Assembly / Mounting options
This model is available in two mounting variants:
1 Screw-mounted version or Adhesive-mounted version
Uses M4 threaded inserts
Uses M4 screws, length 15–30 mm
Wall-mounted
Most secure and tamper-resistant option
2 Adhesive-mounted version - No drilling required