1 / 7
4020 Turbine Fan — zdjęcie 1
1 / 7

4020 Turbine Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A basic 40x20 Fan. I wanted to print a fan using clear PETG.

Ocena
0 / 5
Polubienia
50
Pobrania
273
Wydruki
0
Wyświetlenia
5548
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A basic 40x20 Fan. I wanted to print a fan using clear PETG. You will need to remove the plastic tube in the middle of the stator that holds the bearings with a dremel tool and press fit it into the printed fan body with a little added super glue. The tube is to thin to print. You will need to adjust the hole size in the fan body to fit the bearing tube in the particular fan your working with. I used a WINSINN fan removed the brass spacer and replaced it with bearings.

EDIT: Changed the outer body angle 12/17/19

Print instructions

Category: 3D Printer Accessories

Tagi