Vladilena Milizé Eighty-Six Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament painted using Hueforge Software and printed with PLA.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 210
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello, this is a Hueforge model of Vladilena Milizé from the anime 86 Eighty-Six, ready to print.
You may adjust the colors, but take into account that the final result depends on the material you use, the color, and its transmission distance.
I used a 0,4 nozzle and 0,20mm detail.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 230x194.54mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1.9mm
Filaments Used by author:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA PolyLite Steel Grey Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #14 (1.2mm) swap to Grey
At layer #15 (1.28mm) swap to Blue
At layer #16 (1.36mm) swap to White for the rest.