1 / 1
Remix of Creality HI CFS Mount — zdjęcie 1

Remix of Creality HI CFS Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attachment for the top of Creality HI CFS, and feet-attachment to remove wobbling.

Ocena
0 / 5
Polubienia
37
Pobrania
220
Wydruki
1
Wyświetlenia
1424
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Remix of:

Creality HI CFS Mount

by X3mond

License: Creative Commons — Attribution — ShareAlike

I remixed this by adding rear feet to reduce wobbling, which was causing unstable printer placement and poor print quality.

Parts printed (qty / side / attachment type):

Middle feet: 4× total (2 per side) — feet attachment

  • Spacer: 2× total (1 per side) — Creality HI attachment -  to hold and not break the mount of the Creality HI Attachment once mounted on the structure of the 3D printer. 

  • Bottom_feet: 2× total (1 per side) — feet attachment

  • Mount: 2× total (1 per side) — Creality HI attachment

  • CFS_holder: 2× total (1 per side) — feet attachment - 1x Mirror and 1x Original from file. 

  • Clamp: 2× total (1 per side) — Creality HI attachment

  • Middle_feet: 4× total (2 per side) — feet attachment

Print settings (what I used):

  • Added feet system: PLA, 15% infill

  • Creality HI attachment parts: PETG, 80% infill (probably more than necessary, but it worked for me)

Tagi