Ajax Systems flasher set housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A housing to house all components for an Ajax Systems flasher
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
A housing for a flasher using an Ajax alarm system relay.
The specific set used is the following:
https://www.alarmsysteemexpert.nl/products/ajax-flitser-set-oranje
This set consists of following components:
- Jablotron DE06-12
- Solex 10
- Ajax RelaySwitch
Since the RelaySwitch doesn't have any mounting holes, I decided to just use double sided tape to mount the power supply as well.
The first time putting the flasher on was a bit tight, after that it went on fine. I would also recommend using adaptive layer height to improve the resolution of the slots where the flasher slots into (which I forgot)
There are 2 6.5mm mounting holes in the base, positioned 60mm apart.
STEP and f3d files include rough drawings of the components used as well.