SimpleHuman Butterfy Trash Can Replacement Damper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement part for an older SimpleHuman butterfly trash can
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These parts assemble to use a BansBach (see assembly section for part number) rotary damper and the factory mouting bracket from the SimpleHuman Butterfly trashcan. Thisre are several damper designs, so remove basket and see if it has a steel mounting plate, two springs, and a linear geared rotary damper that matches image provided.
You will need four M3 H4 heat press in threaded inserts and matching M3 screws (2 sizes). The damper assembly is designed to fit aBansBack easylift FRT-D3-R501 rotary damper, which is a clockwise damper to provide quick up, slow down motion.
I used datasheets from BansBack to ensure the part would fit, and took measurements from the worn out factory damper shown in the photos.
Note: The rack shown is a factory part recycled for the new damper. A future design will include the rack as a part.
For a replacement rack, try this one!