1 / 1
FJ40 Toyota Land Cruiser Hood Bumper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement hood bumper for a FJ40 Toyota Land Cruiser
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits late 70s era FJ40. Not sure sure how widely compatible it is with all years. Slot spacing is 85mm, slot width is ~15mm.
Print out of TPU. The TPU I used is 95A hardness and worked well with 40% infill. Adjust accordingly if your TPU is harder or softer.
Press fit bumper, works extremely well. TPU is very durable.