1 / 5
Parametric Mini Vise
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
If you would like to customize the size, you must download the .f3z file, and then you can change the dimensions by going to Modify -> Change Parameters. Any reasonable dimension will work, but if it's too small/big, Fusion360 can error. If Fusion only gives a warning and the model appears fine, that is okay.
3 different jaw faces are available, you can also create your own with the attached .step file.
To assemble this design, you will need
9x - M3 heat seat insert
8x - M3 6mm screw
1x - M3 20mm screw
The .step and .f3z file tells you where to place the screws. The assembly is self-explanatory.