HSW modular stuff holder/basket/bucket, lattice-aligned
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another holder Honeycomb Storage Wall (HSW), but lattice-aligned.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 132
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
description
Those are holders for HSW.
They are lattice-aligned, meaning that they use the distances between HSW's hexagon centers as width and height. Therefore, there is no distance, or regular distance, between each holder.
This is quite handy if you want various widths but no waste of space.
The height alignment serves no much purpose, but it's nice that way.
The hooks are on the top in order to avoid the lever effect. This has the downside to make supports required.
The bottom back struts are to maintain the holder directly on the lattice if there are no insert. This job is supposed to be done by the inserts (RostaP's insert-empty). I realized this too late. If you have an insert there and need a strutless version of this model, just ask me.
how to print
As supplied, bottom on the build plate. You'll need supports for the hook; use normal snug or tree, on build plate only.
how to use
The HSW should be mounted flat-top, ie 2 faces of the hexagons are horizontal.
The holder lengths are calculated to allow to hook several holders side by side in the same row with no space in between.
available sizes
available lengths
Multiples of 40.876 mm, corresponding to the distance between the centers of 2 closest HSW hexagons of the same row.
available heights
Multiples of 23.60 mm, corresponding to the distance between the centers of 2 contiguous HSW hexagons of the same column (and the height of a HSW hexagon width its walls).
available depths
40 mm only for now. Ask me and i'll supply other sets.
link to Honeycomb Storage Wall
HSW files: https://www.printables.com/model/152592-honeycomb-storage-wall
You need:
• a wall;
• probably attaches for the wall;
• an insert (insert-empty/insert-hollow) from original HSW files (cf above link) for each hook.