Remixed LDO COB Light Strip Mount for 1515 Extrusion (8mm, 10mm, 12mm wide)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts 8, 10, or 12mm wide LED lights on 1515 extrusion.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I liked the LED mounts from LDO's 2.4 kit, and bought some 12mm 24V RGBW lights to put on all my printers for some status indication while also maintaining decent looking lighting.
The original BOM is changed slightly, now needing 2x M3x6 BHCS instead of M3x8 SHCS to mount to the extrusion.
This BOM is per mount:
2x M3x6 BHCS (To mount to frame)
2x M3 hex nuts (To mount to frame)
2x M3x5x4 "Voron Spec' Heatset Inserts (To assemble mount)
2x M3x6 FHCS (To assemble mount, screws into heat set inserts)
All widths have 50mm, 100mm, and 150mm STLs. 12mm also has lengths for the specific length of LEDs I bought from BTF lighting.