Rugged box for BLOKUS travel set (logo remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged box with the Blokus board game logo. No MMU required.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is the modified lid from Rugged box for BLOKUS travel set by Lu123. It was modified to have the logo from Travel Blokus by Print3D Pilot.
The 3MF file has all the 3 parts combined to allow for just the logo border to be a different color. Normally I would upload just the STLs and let you slice it, but the value of the 3MF is the 3 perfectly placed models (lid, logo and logo border).
Disclaimer: G-Code generated directly from the 3MF file will cause your printer to change filaments immediately after the purge line. I couldn't figure out how to solve this elegantly. I had to manually edit the gcode files and remove this M600 tool change command. This modified PLA/PETG gcode files for a MK4S are attached. It is still compatible with other printers such as the Core One. The logo border prints first (obviously).