Zoro from One Piece Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament painted using Hueforge Software and printed with PETG. Image generated with the help of AI.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello, this is a Hueforge model of Zoro from the anime One Piece, ready to print.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may adjust the colors, but take into account that the final result depends on the material you use, the color, and its transmission distance. Use PLA for better results.
I used a 0,4 nozzle and 0,20mm detail.
The Model is 171.25x230mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.6mm and the Actual Depth is 2.4mm
Filaments Used by the author:
PETG Black Transmission Distance: 0.3
PETG BambuLab Basic Red Transmission Distance: 2.5
PETG green Brown Transmission Distance: 1.5
PETG BambuLab Basic Green Transmission Distance: 1.7
PETG BambuLab Basic Orange Transmission Distance: 4.5
PETG White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Brown
At layer #14 (1.2mm) swap to Green
At layer #17 (1.44mm) swap to Orange
At layer #20 (1.68mm) swap to White for the rest.