Game Changer Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Game Changer podium Clock
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Game Changer Podium Clock.
Measures 120mm tall, 75mm wide, 62mm deep.
This was built around:
Adafruit 7 Segment 0.56" display (https://www.adafruit.com/product/865)
Cherry MX Silent Red Switches (https://a.co/d/dHutj1a)
Everything is friction-fit. If your printer isn't dialed in, you may need to sand the corners. For the 7 Segment display, be sure to install it from the front (look for square cut-outs on left & right side). The backpack fits behind and the "gold" frame around the display friction fits it into place.
I needed to hot-glue the rainbow items together, in the event this thing falls or gets something pushed into it. The Cherry MX switches were glued into place (light dab of Gorilla glue on the corners), and the keycaps were also glued (small dab on the inside of the keycap).
I used 3M Dual Lock "Fastener" to hold the PCB and Battery in-place. (https://a.co/d/hhdhBBY).