Beretta 694 stock for Quest 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simulates a Beretta 694 for Clay Hunt VR on a meta Quest 3
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 184
- Wydruki
- 2
- Wyświetlenia
- 1011
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stock that replicates a Beretta 694 for use with the Meta Quest 3 and Clay Hunt VR.
There are two grips - one that is checkered and one that is smooth. You can use either one, depending on your preference.
There are two buttstocks. One is a one-piece design for printing with a regular printer. The other is a 2-piece design, where the buttplate is a separate object so you can print the stock with a rigid filament and the buttplate with a flexible one like TPU if you have a multi-toolhead printer that can print TPU and something else at the same time. I use a Snapmaker U1 for this.
To put the stock together, you need six 1/4x20 1.5" screws and six hex nuts. Or, alternatively, you could use 6mm bolts and nuts of the same length.