ICON Flex-Head Rachet and Bit Set Box with added 1/4" Socket Storage

I created this box because I loved the Flex-Head Rachet and Bit Set and wanted to add a Quinn 1/4" Socket set I already owned to make it a more complete kit while keeping it as small as possible. I didn't want to spend the $80 dollars on the new kit from Harbor Freight that included the sockets and didn't feel the need to have the other tools that were included in that set so I made a kit more suited to my needs by adding just the socket storage. 

I tried to keep everything as small as possible to keep it easily transportable. It holds everything that comes in the ICON Locking Flex-Head Ratchet and Bit Set and adds SAE and Metric Sockets from a Quinn 1/4" socket set while only taking up slightly more space than the original. Both are available from Harbor Freight. 

Hardware Needed / Print Instructions:

Box can be printed in place without supports. 

I recommend you print the latch on its side to keep the filament running lengthwise for the strongest possible latch.

All holes are designed for a 1.85mm finish nail I had on hand for the hinge pins and latch. In the box pictured I just used PETG filament for the hinge pins and top pin for the latch. I used the nail on the lower pin of the hinge. SO FAR, it has held up well and not caused any problems but for longevity, it is probably best to use metal pins. 

Bit holder should be printed in TPU to allow the bits to slide in and out easier and have adequate retention. It is a fairly tight fit in the top but I used super glue to hold it in place. 

Box Size is 142 x 104mm including hinges and latch.

Icon Rachet Set can be found here: https://www.harborfreight.com/locking-flex-head-ratchet-and-bit-set-35-piece-58074.html?hftm_sc=780&hftm_source=google&utm_source=google&utm_medium=cpc&utm_campaign=23230280339&campaignid=23230280339&utm_content=&adsetid=&product=58074&gad_source=1&gad_campaignid=23234519884&gbraid=0AAAAADAHb4feQbkXUGKskFYz0I3upllO-&gclid=Cj0KCQiA6Y7KBhCkARIsAOxhqtPCRRoKuJtPyKYWgmsabX_LLWkYFc395OYxvQhoKt1Xq4AO-A0QjykaAkQZEALw_wcB

Quinn set I used to model can be found here: https://www.harborfreight.com/14-in-drive-sae-and-metric-chrome-socket-and-ratchet-set-21-piece-64537.html