1 / 4
Torani and NuNaturals Syrup Holder — zdjęcie 1
1 / 4

Torani and NuNaturals Syrup Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Syrup bottle holder for both Torani and NuNaturals bottles.

Ocena
0 / 5
Polubienia
8
Pobrania
23
Wydruki
1
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

My sister, who is also my barista, has both Torani and NuNatural syrups.  I made her this bottle holder as a thank you for the coffee!

This model has a hand-hold with the intent to pull the holder out from a cabinet.  Be sure to block supports on the underside of the handhold to let the slicer make use of it's bridging capability.  

Because of the size the model, it will need to be rotated 37 degrees to fit on a Prusa MK4S or similar sized print bed.  I used organic supports and reduced the "First Layer Expansion" from 3mm to 2.5mm for some additional space savings.