Arrma Granite Voltage Front Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I looked everywhere for an Arrma Granite Voltage front bumper. Couldn't find one to 3D print so I designed my own. I…
- Ocena
- 1 / 5
- Polubienia
- 19
- Pobrania
- 106
- Wydruki
- 2
- Wyświetlenia
- 1058
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I looked everywhere for an Arrma Granite Voltage front bumper. Couldn't find one to 3D print so I designed my own. I created the front hanger and mount points myself. I used the front design found here:
https://www.arrmaforum.com/threads/3d-printable-front-bumper-for-3s-4s-rigs.20929/
To install, remove the three screws holding the front suspension hanger (be careful not pull out the pins) and the two screws that hold on the suspension. Remove the original bumper and kickplate. Install the new bumper using the screws and you're good to go!
Printed it in TPU since I wanted it to be flexible but strong.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
50
Filament: Overture TPU Grey
Category: R/C Vehicles