IKEA SKADIS Heavy Duty Mobile and Clamp Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for the Skådis board
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Wanted the option to have the Skådis board mobile, so redesigned the feet with a dowel so they stay on the board when you lift it.
Also made extra supports that connect inside the feets like the clamps in the original design to keep the board from falling over.
They are just an extra option and safety and can be removed if you wish to clamp the feet to a table.
Just mirror the foot and support in the slicer so you get a set.
Use supports when printing the support back foot.
Update 2026-04-18: The thickness of the Skådis boards vary a little. I've added a 0.4mm shim to account for that. Put it inside the foot before sliding the board in. You can scale the shim in Z direction in the slicer if you need a thinner one.