Tri-fold pencil case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed this from TPU, designed for my Neice. you will need 4 magnets they are 5mmx2mm
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a pencil case I designed it holds 21 standard pencils ,Pictured with Kalour brand but Staedtler pencils also fit . I used 4 5x2mm magnets to hold it closed.
you should need no supports for the holes, as I printed with none.
I used Elegoo Rapid A95 TPU and some PETG for the hindges.
after forgetting to apply glue release agent I found out that the TPU sticks just enough to these plates that pulling them off is only a bit of effort, well giving you the cool pattern on it. as seen in the pictures.
(I used the offical Elegoo textured noveltiy plates, and A creality branded one in prototype phase)
I used a wood hammer to put in the hinges.
please not this case is desinged to be printed out of flexable fimiment only, the fit is very snug on purpose this small one you flex the top to release the pencils.