O and s guage shelf track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cheap O/S guage track for putting on the shelf. Still have to make your own shelf though.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a cheap display track for O and S gauge model trains (1:48 and 1:64 respectively). Print it off and stick it on your shelf, maybe drill some holes for screws, and you've got a track solution. For O gauge you do not have to line up the inner rail, for S gauge you do. Really I did the S gauge just because I thought it looked like real life narrow gauge lol.
Print settings:
PLA
5% infill, grid
0.20mm layer lines
Please note that I do not have an S gauge model, therefore I did not test it, only designed based on online numbers (23mm). Feel free to tell me or make a remix of your own!
Suggested to print with supports ONLY on build plate to minimize drilling in the female connector on the track.
Disclaimer: This is for the shelf ONLY and does not run actual trains since there is no electrical connection.
(ps first design see what I'll do in a few years...)