6x elite silly shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6 full lengths or 12 half darts in one silly shell. requires high airflow
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
i'm pretty sure this is the maximum amount of elite darts that can fit inside a standard silly shell. The portion of the shell in which the darts are held starts at 10mm and ends at 80mm so two 35mm darts will be able to sit flush with the lip of the shell.
until i figure out how to use fusion 360 just the 3mf will have to do for now (i am sorry). update on feb 22 2026: i have now added an stl version
i recommend printing this with 100% infill
it will require some practice to get the darts inside, as it is a very tight fit and you must make sure each dart stays in its own channel and doesn't get squished into a neighbouring one. also the performance is obviously going to be pretty terrible but who cares when you're shoving twelve whole darts into the form factor of a regular 34x80 silly shell. Given the sheer volume of foam you have to displace i'd be surprised if this works out of anything less than a breacher or battle axe