1 / 2
1:10 GT1 Mesh Staggered Wheels - 52mm 1.9" diameter - 12mm hex
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of staggered (different front/rear offset) GT1 mesh style 55mm x 26mm wheels for a 1:10 scale model chassis
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Newer version of this design here:
Original description
I wanted a staggered setup with different offsets for the front and rear for my 911 GT3 (992) from Tamiya.
Requires supports. Print with the face oriented up.
Durability seems fairly good. I only broke one when I rammed a wheel against a door frame. It split along a layer parallel to printing, right at where the hub connects to the spokes. A bit of CA glue fixed it and it’s back in action.
