Backpack Button Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your souvenir pins on your backpack securely – It's real firm!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Are you fed up with the metal stoppers on those decorative buttons always slipping off, making you lose them? Do you wish those pesky cheap factories used security pins instead? (If yours did, congratulations, you don't need this.) Enter this TPU stopper: Instead of relying on form fit of a thin metal nub, it presses on to the pin with a lot of force, just the right amount so it will not slip off by itself, ever, but you can remove it by pulling on the stopper firmly.
The model prints in about 5 minutes, just over 20 minutes for 4 (not including heating or calibration).
Use Thermoplastic Polyurethane or a similar flexible filament, you can print without infill.
Preferably use the 3mf files, they are smaller, high-resolution and contain print settings already.
I would love it if you posted a Make with a photo of your print, and your Gcode if you get it to print on another printer!
Print was tested on the Prusa Core One, with Fillamentum Flexfill TPU 98A.