1 / 6
Remix of the "Design Moon Lamp" optimized for Prusa Core One — zdjęcie 1
1 / 6

Remix of the "Design Moon Lamp" optimized for Prusa Core One

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the "Design Moon Lamp" optimized for Prusa Core One

Ocena
5 / 5
Polubienia
507
Pobrania
1431
Wydruki
15
Wyświetlenia
7529
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of the Design Moon Lamp by Frank Deschner to be able to print it better on the Prusa Core One with additional settings:

  • Organic supports activated in the top moon parts to avoid holes in the top surface

  • Fuzzy skin on the holder parts

  • Preset infill, wall and other settings in the .3MF files 

  • Avoid crossing parameters to enhance print quality 

  • Reduced print time (about 26 hours compared to to his print time infos)

Printing instructions:

  • 0.2 speed profile

  • White PLA for the moon part

  • Any PLA color you like for the holder parts

  • Moon part:

    • Brim set active

    • Brim width: 5mm

    • Painted supports on the inside top part

    • Organic supports for support enforcers set active

    • Infill: 100%

    • Fill pattern: Rectilinear

    • Avoid crossing parameters set active

    • Detect bridging parameters set active

    • Fill gaps set active

    • Perimeter generator: Arachne

  • Holder parts:

    • Infill: 30%

    • Perimeters: 8

    • Fuzzy skin painted on the outside walls

Notes:

Here are some detail pictures:

Happy printing =)

Tagi