RV/Trailer Water Inlet Jug Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additive, anti-freeze or water jug friendly funnel for RV's, Trailers or anything else that has a hard to use fill port
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Got frustrated filling my RV and travel trailer with anti-freeze for some winter usage. Hard to get a normal funnel at a decent angle, and having a guide for the jug to line up with helps a lot. FreeCad and a Prusa Printer to the rescue.
Example pictures show this at 100% print size, and 125% print size. The 100% works better on the trailer, but it's water inlet is not recessed in a panel. The 125% works better on the RV. It fits snugly into the inlet with that long taper and sticks out past the panel.
Recommend using PETG or PCTG. I printed with 6 layer walls so it's essentially solid. Printed on a Prusa Mini, vertically oriented in 4 to 5 hours
Print some spares to give away to fellow campers