1 / 3
Ryobi 300e/480e/ex Battery state of charge meter adapter for Runleader meters — zdjęcie 1
1 / 3

Ryobi 300e/480e/ex Battery state of charge meter adapter for Runleader meters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to install a runleader more advanced battery/voltage meter into a Ryobi riding lawn mower model 300e/480e/480ex

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My mower needed batteries so I decided to do a LifeP04 battery upgrade, this made the stock battery meter useless as it was designed for lead acid.   Very few meters out there fit in the special smaller hole that Ryobi chose to stamp in the panel so I designed one to fit as an adapter.    I chose the RunLeader meter as it had features I wanted and was configurable.   This adapter I printed out of ABS to tolerate being outside in heat,  ASA would probably be a better choice,   PETG can also work. I sometimes park it in the sun and PLA melts in summer direct sun from my experience.

at first it looks like the meter's connector will hit the existing meter hole opening,  it just fits and makes as tight of a seal to the panel as the original meter does.  the lower right panel screw will also just clear the meter adapter housing.

This is the meter I purchased  https://www.amazon.com/dp/B0BM3S8N6D etched on it is the model number RL-BI025B-BT   Be aware the meter's bluetooth app wants personal information.   It's not really worth downloading the app as it really doesnt do anything useful and the meter has to be completely set up by following cryptic prompts on the meter face it's self.


Freecad file included in case you need to make adjustments.  Released only step file as all modern Slicers now support the better format.  if you really really need an STL let me know and I'll add it to the file list.

Note: my photos show the first prototype fitting.  I do not reccomend printing it with the supports on the bottom.  flip it upside down and support inside the cup to get a far cleaner underside print. Inside the cup has enough clearance for the ugly support surface.