Anycubic ACE Pro Bearing Hold-Down Plate with Tension Adjustment Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable bearing hold-down plate for the Anycubic ACE Pro that improves filament grip and feeding reliability by allow
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 274
- Wydruki
- 1
- Wyświetlenia
- 1570
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an improved bearing hold-down plate for the Anycubic ACE Pro, designed to be stronger and to add adjustable tension to the filament drive assembly.
Properly holding down the drive wheel shaft and bearing is critical for reliable filament feeding on the ACE Pro. The original design relies on fixed tolerances, which can result in inconsistent filament grip between units. This upgraded plate adds a tension adjustment screw, allowing you to fine-tune the pressure applied to the bearing. Proper adjustment improves filament traction, reduces slipping, and helps minimize feed-related issues such as intermittent clogging or under-extrusion.
Key features:
Adjustable tension screw for precise bearing pressure control
Improves filament grip and overall feeding reliability
Compensates for unit-to-unit tolerance variations
Direct replacement — no permanent modification required
This part is especially useful if you experience filament slipping, weak grip, or recurring feed errors even after basic troubleshooting.
Print with support on build plate only.
Hardware:
4 × M3 × 12 mm screw
4 × M3 nut