1 / 4
Bracket for awning crank (Halterung für Markisenkurbel)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement bracket for an awning crank, the original one broke after some time.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Printing recommendations:
PETG is recommended, as the part is likely to be exposed to sunlight.
For maximum bending strength, print the part in an upright orientation and use supports.