Slim Frame for Pimoroni Inky Impression 7.3" (2025 Spectra Edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2025 Inky Impression 7.3" frame. Fixed dimensions, correct screen alignment & friction-fit back. No buttons.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 104
- Wydruki
- 2
- Wyświetlenia
- 534
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Features
Low Profile: Thinner walls and a sleek front bezel for a modern look.
Button-Free Sides: The side button cutouts have been removed for a cleaner, solid frame aesthetic. I made this specifically for my Tempest Weather dashboard, so buttons aren't needed.
Friction Fit Backplate: The backplate is designed with small triangle crush-ribs for a snap-fit hold (depending on your printer tolerances).
Print Instructions
Orientation: Print the Frame face-down (for the best surface texture). Print the Backplate flat.
Material: PLA or PETG.
Supports: None required.
Infill: 15-20% Grid or Gyroid.
Layer Height: 0.2mm recommended.
Assembly
Place the frame face down on a soft surface.
Drop the Inky Impression PCB into the pocket (it should be a gentle fit with ~0.5mm tolerance).
Press the backplate into the rear recess. The ‘teeth’ should grip the edges well enough to hold the screen in place, though if you are wall mounting this, you might want to add in some extra support materials or cutouts for the screw holes. If you can find short enough screws, that would work well and give fuller support. Recommended Screw: M2.5 x 5mm (use at your own risk, not tested! Perhaps print some M2.5 washers too!)
Files Included
Inky-impression-frame-just-frame.stl - The main body.
Inky-impression-frame-backplate.stl - The rear protective cover.