Sim Racing Canopy for Triple Monitors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For added immersion. Yes you can duct tape some foam boards together, but this provides a very high quality finish.
- Ocena
- 0 / 5
- Polubienia
- 122
- Pobrania
- 278
- Wydruki
- 1
- Wyświetlenia
- 9155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Developed this sim racing canopy, as I wanted something that had a high quality OEM-like finish with zero flex.
Consists of a number of brackets angled at 45degrees for the centre, and 38 degrees for the side.
Instructions:
You will need to print a number of these joiners and brackets dependent on the size of monitor
For each 27" monitor you may have to print 6 x 100mm brackets (32.7 degree for the side monitors, and 45 degree for the center)
Same as above for the foam joiners, you will need up to 6 x 100mm Joiners for both monitors
there is an example image of how they connect together to help explain this
And you will need 5mm black foam (that can be purchased from any hardware / office supply store), you can buy two A2 sheets and cut with the attached template (image)
Hope you enjoy, do drop me a like, or post a make for us to see.
Printed in PETG, 10% infill.