maxload p1 relay clamp Porsche 911 996
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Maxload relay clamp for Porsche 911 996
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Mounting bracket to hold a relay to the front cross brace of a Porsche 911 996 located under the windscreen cowl (probably a generic relay but modelled on one supplied for Maxload airlift suspension). it is printed with 2 captive m6 nuts in the lower section (pause print). once tightened down, it clamps very strongly, stopping any chance of it slipping down the brace and shorting out the live terminals against the bodywork.
there is a slot in the design to allow for a cable tie to pass through and hold the relay firmly in place to the bracket.
items needed:
2x M6 nuts
2x m6 20mm Alan head bolts
printed at 0.2mm 0.6mm nozzle, no supports needed.