1 / 2
MBS Rockstar II Pro XL Hub Wideners / Spacers — zdjęcie 1
1 / 2

MBS Rockstar II Pro XL Hub Wideners / Spacers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are various thickness widening spacers for MBS Rockstar XL esk8 hubs

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These are widening spacers for MBS Rockstar II Pro XL wheel hubs for esk8. I made them in various thicknesses - 5, 10, 15, 20, and 25mm wide. Note that you will need to get longer screws to accomodate the spacers. Stock wheel screws are M4x50, so add on your widening spacer thickness to that for the length you'll need. They are pretty tight tolerance, so you may need to play with some of your slicer settings to get them to fit exact. I originally experimented with PLA for initial modeling, and then switched to ASA for my final ones I will be using. I would recommend printing with all walls for max thickness.

You will need supports regardless which side you print it on, however I recommend printing it with the side with only the outer ring needing supports as the side on the bed, because it will use less supports than the other side. 

EDIT 12/21/25: Files added for all thicknesses with no supports needed. I added a chamfer to the edge needing supports so you won't need supports anymore, however there will be a slight gap on the inside of the wheel where the chamfer is - you can choose whichever version you'd like. 

Tagi