Enclosure Tent Filament Spool Holder Mount (Ender, Sunlu, Creality 8mm fiberglass rods)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight, hanging spool holder for 8mm fiberglass rod tent style enclosures. Supportless print.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Created from scratch, uses the stock nuts and hardware from a creality-style spool holder. Uses less material than other designs while maintaining strength, also saves as much room as possible for lower tents.
Printing instructions:
Optimized for printing flat, supportless. Print in 0.2 layer height for best overhangs on the side clip.
Install Instructions:
Punch through the sacrificial supports with the screw prior to inserting the nuts. Use the screws to seat the nuts first for easier install.
Thread the upper rod through the full hole, then slide and clip onto the side rod, optionally fixing it with zip ties.
For install on back corner, mirror the design.
Tags:
Spool holder; filament holder; sunlu enclosure; creality enclosure; 8mm fiberglass rods; tent enclosure