1 / 1
Anti-lift blocks for old sliding glass patio doors — zdjęcie 1

Anti-lift blocks for old sliding glass patio doors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prevent the security nightmare of thieves easily prying sliding glass panels up to break into your home.

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
236
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I needed to improve the security of my old 1980's sliding glass door.  These are notoriously easy to break into, especially if the sliding panel is mounted on the outside of the house.  Anybody with a crowbar can remove the panel in seconds to B&E into your home.

The idea of the anti-lift block is to prevent excess movement to prevent this.  Naturally, if you ever have to remove the glass door in the future, these blocks will have to be removed.

I suggest using #6x1 stainless steel flathead screws and using a minimum of two of these blocks in the top sill of the moveable panel.

The FreeCAD model is provided so that you can adjust to your dimensions.  I have found that 2-3mm pad thickness was about right for my application.  You do not want the blocks to interfere with the door, nor do you want them so thin that they don't function as an anti-theft device.

Using these will greatly secure these old doors, especially when the panel is (stupidly) on the outside of the house.

 

Tagi