Godox iT30 Pro MagMod Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts MagMod diffusers like the MagSphere 2 to the Godox iT30 Pro
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The real MagGrip from MagMod doesn't fit the Godox iT30 Pro very well. It can't go on all the way and even if it did, it blocks all the ports forcing you to take off the mag grip every time you want to charge the flash. This adapter fits snugly onto the flash and has cutouts for the charging port and wide/narrow toggle selector.
Simply press in a stack of four 10x5x2mm rectangular magnets into each side using a vice. Make sure you check the magnet's polarity against the MagShpere before pressing in the magnets!
Now you can use your MagMod accessories with the Godox iT30 Pro!
I use fuzzy skin with a point distance of 0.2mm and depth of 0.1mm to give it a professional texture. Use a modifier to prevent the inner walls from being fuzzy to ensure everything fits properly.