Monster Jam Megalodon 1:15 Tire Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The foam tires on our remote control 1:15 scaled Megalodon are wearing out. Planning to print and try these out.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The foam tires on our remote control 1:15 scaled Megalodon are wearing out.
Planning to print and try these out in the near future. Have a few prints lined up before these. If someone beats me to it, please share!!
I plan to print with .2 layer width and about 15% infill and see how it does.
I have printed a few of the hub/rim to try to get them right, and they turn out decent. Definitely add a few layers on the Rim part if you end up printing that. The one I printed was a little thin on the Exterior contoured rim part, i only used a wall thickness of two if I recall.